Raw material pretreatment for aerated block/slab production line equipment

A complete automated production line for aerated concrete blocks/slabs mainly includes raw material pre-treatment series equipment, batching pouring and mixing control system, flipping hoist, JQF6 cutting system, rebar mesh forming and transfer system, packaging system, and steam curing system. Below, Tengyu Machinery will provide a detailed introduction to these devices. Due to space limitations, this article will mainly introduce the raw material pre-treatment series equipment.

2025-01-09

Introduction to the process of gas-filled panel production line

In the previous article, I introduced the process flow of the aerated concrete block production line. Today, I will talk about the production process of the aerated board production line, hoping to be helpful to everyone.

2025-01-09

Introduction to the Configuration of Fully Automatic Brick Production Line Equipment

Jiangsu Tengyu Machinery specializes in the production of brick-making equipment and its production lines. Below, I will introduce the general equipment configuration of the fully automatic brick production line, taking the Tengyu QT12 type non-fired brick machine as an example.

2025-01-09

Four Major Advantages of Investing in Aerated Concrete Block Production Line Projects

Aerated blocks have been welcomed by the construction market due to their high strength and excellent performance since their launch. As a result, more and more companies are investing in aerated block production lines. So, is it still necessary to invest in 2020, which is becoming increasingly mature? What are the advantages of investing in aerated production lines? Below, Tengyu Machinery will introduce the four major advantages of investing in the aerated block production line project in detail, helping everyone to feel more assured.

2025-01-09

What is the development prospect of the non-fired brick machine in 2020?

The pandemic in 2020 almost swept through various industries. Except for a few industries that were less affected, traditional manufacturing and foreign trade exports were hit hard. Many small businesses could not withstand this wave and went out of business. Many predicted that the real estate market might face a collapse, but unexpectedly, housing prices remained exceptionally strong. So, what will be the development prospects of the brick-making industry related to the real estate market?

2020-05-21

The environmental protection industry upgrade: three major areas will enter a new stage.

The main sources of dust and nitrogen oxides emissions in our country are industrial production, accounting for 83% and 71% respectively. If we further subdivide the industrial sector, the power industry (especially thermal power), steel, and building materials industries are the main industries emitting smoke, dust, and nitrogen oxides. These three industries account for more than 70% of the emissions of these two pollutants from all industries.

2020-05-14

China's low-carbon energy is in a stage of rapid development.

As of the end of 2017, the installed capacity of photovoltaics in our country has exceeded the "13th Five-Year Plan" target, while the installed capacity of wind power is still less than 50 gigawatts away from the "13th Five-Year Plan" target. If the original indicators of the "13th Five-Year Plan" are considered an unchangeable ceiling, then there is very little room left for current wind and solar energy. The installed capacity of solar energy has now reached 150 million kilowatts, and the installed capacity of wind energy has reached 180 million kilowatts. Additionally, this year has seen significant improvements in the abandonment rates of wind and solar energy. By the first half of this year, the abandonment rate of wind energy has decreased to about 8%, while the abandonment rate of solar energy is approximately 3%, and this number will continue to decrease. Therefore, the National Energy Administration has also stated that the original indicators of the "13th Five-Year Plan" need to be adjusted, and this indicator will be raised rather than used to limit the development of renewable energy.

2020-05-14

Series of aerated concrete block/slab complete equipment

Jiangsu Tengyu Machinery Manufacturing Co., Ltd. is located on the picturesque southern bank of Luoma Lake in Suqian City, Jiangsu Province, along the ancient canal scenic area. It is a national high-tech enterprise that integrates research and development, manufacturing, sales, and service of building materials and environmental protection equipment. The total area covers 100,000 square meters, with a building area of 48,000 square meters. It is a designated production unit for national building material equipment, a national-level contract-abiding and trustworthy enterprise, a Jiangsu Province contract-abiding enterprise, a Jiangsu Province technology innovation enterprise, and a key support high-growth enterprise in Suqian City. The company has established the "Jiangsu Province Concrete Block Molding Equipment Engineering Technology Research Center," "Jiangsu Province Enterprise Research Production Workstation," and "Jiangsu Province Enterprise Technology Center" in collaboration with Nanjing University of Science and Technology, and is recognized as an excellent engineering technology research center in Jiangsu Province. The "Tengyu" brand series of block machines has been recognized as a quality product in Jiangsu Province.

2020-05-14

Completion of Environmental Protection Acceptance Publicity Content

According to the "Decision of the State Council on the <Regulations on the Environmental Protection Management of Construction Project Completion>" (State Council Order No. 682) and the Ministry of Environmental Protection's "Announcement on the Release of the <Interim Measures for Environmental Protection Acceptance of Construction Project Completion>" (National Environmental Regulation Environmental Assessment [2017] No. 4), the environmental protection acceptance situation of the Jiangsu Weiting New Building Materials Technology Co., Ltd. project for the annual production of 1.4 million square meters of green energy-saving multi-purpose bricks is hereby announced as follows.<!--建设项目竣工环境保护验收暂行办法--><!--建设项目竣工环境保护管理条例-->

2025-01-09

Enterprise Quality Credit Report - Jiangsu Tengyu Machinery Manufacturing Co., Ltd.

The quality credit report published by Tengyu Company is written with an objective and fair attitude. The content of the report is true, valid, and in line with the actual situation of the enterprise. The report includes improving employees' quality awareness, quality organizational management system, quality concepts, and more.

2025-01-09